Fix: Windows Could not Automatically Detect this Network’s Proxy Settings

Some times you might Notice a yellow warning sign in Your Own Wi-Fi name in the system tray. If you click on the wi fi name and select trouble-shoot then you’ll almost certainly notice the mistake using a message “Windows couldn’t automatically find that this network’s proxy settings”. Even though yellow danger sign does not necessarily indicate you may find this mistake however it’s highly likely specially in the event you fail to use your online if your web is actually slow. This mistake might appear at any moment with no prior indicators and certainly will almost certainly prevent you from creating an online business.

 

The mistake can be Brought on by a shift in proxy configurations of your Windows. The shift in configurations can be Brought on by an illness or alter from System documents and system preferences or document corruptions that’ll result in change In settings. Most the can be Brought on with a malware or even due to a few System file problems on your PC.

 

1] Check proxy server settings

 

Windows could not automatically detect this network’s proxy settings

 

This is probably the best solution to this problem since this issue generally occurs due to a wrong proxy server. Press Win + R, type inetcpl.cpl and hit the Enter button. Alternatively, you can search for Internet Options in the Taskbar search box or Cortana. After opening the Internet Properties window, switch to Connections tab. You should find a button called LAN settings. Click on it. After that, make sure the Use a proxy server for your LAN option is unchecked. If it is checked, remove the check-mark and save your changes.

 

2] Check Proxy settings in Windows Settings

 

If you often use a manual proxy, this is when you need to check up. For that, press Win + I to open Windows Settings panel. After opening, go to Network & Internet > Proxy. On your right-hand side, make sure the proxy setting is correctly entered. Also, you can disable the manual proxy and enable only Automatically detect settings option.

 

3] Obtain DNS server address automatically

 

This issue often occurs when you use a direct Ethernet connection or use the Ethernet cable through a Wi-Fi router. If you haven’t enabled this Obtain DNS server address automatically option, you may get the error message.

 

To confirm, press Win + R, type ncpa.cpl and hit the Enter button. You can find Ethernet or any other connected network name. Right-click on it, select Properties > Internet Protocol Version 4 (TCP/IPv4). Next, click on Properties. In the next window, check whether Obtain DNS server address automatically is selected or not. If not, you need to select it along with Obtain an IP address automatically.

 

 

 

Note: This solution works only when you are using an Ethernet cable through a router. It doesn’t work when you have a direct Ethernet connection.

 

4] Restart network adapter

 

Every computer has a network adapter that helps users to get the internet connection. You can restart that network adapter and check if it works or not. For that, press Win + R, type ncpa.cpl and hit Enter. Now, right-click on the connected network name and select Disable. After a minute, again right-click on the same and select Enable.

 

5] Scan PC with adware removal tool

 

Sometimes adware and malware can enable the proxy server settings automatically or make some other changes internally. Hence, you might get an error when trying to connect the PC to the internet. Therefore, this is a good idea to scan your full system with a reliable adware removal tool like AdwCleaner.

 

6] Install/update network driver

 

Although Windows 10 detects the network without installing new drivers, you may need to install afresh or update your network driver.

 

7] Reset Internet settings

 

 

 

If you reset Internet Explorer settings, you might be able to fix this problem as well since it removes all the additional changes made by the user or system. You can reset to factory settings using this option. For that, press Win + R, type inetcpl.cpl and hit the Enter button. Switch to the Advanced tab and click on Reset button. On the next window, click on the Reset button again. After that, restart your PC and check whether you get a valid internet connection or not.

 

8] Temporarily disable antivirus, firewall software or VPN

 

If you have recently installed any antivirus, firewall software or VPN app, you should disable it for a short time to check if they are creating an issue or not. Sometimes such software can cause problems related to incoming as well as outgoing connections.

 

9] Reset TCP/IP

 

Resetting TCP/IP can fix this issue if the problem is occurring due to corruption.

 

10] Use Network Troubleshooter

 

 

 

Windows Settings panel comes with a troubleshooter that can fix various internet issues. To use this, press Win + I to open Windows Settings. Then, go to Update & Security > Troubleshoot. On your right-hand side, click on Internet Connections and Run the troubleshooter button and follow the screen instructions.

Comments (No)

Leave a Reply