FIX: Ethernet doesn’t have a valid IP configuration

Ethernet doesn’t have a valid IP Configuration is due in case your NIC (Network Interface Card)hooked up for a Router or Modem through the Ethernet Cable is Not Able to Have a VALID IP Address (Internet Protocol). That is necessary for that computer to consult with your router, and work online. There are 3 chief causes behind this issue that occurs, the initial one is really a faulty router, the 2nd one is really a wrongly assigned internet protocol address into the personal computer, and also the next may be the faulty NIC. We’ll handle the difficulty in three different steps, plus so they need to be followed within the order recorded.

 

Ethernet doesn’t have a valid IP Configuration TP Link, Netgear — this issue could affect just about any kind of system hardware, and lots of users reported that this issue whilst using the TP Link and Netgear apparatus.

 

Ethernet doesn’t have a valid IP Configuration Powerline — power-line is the easiest approach to prepare a system, nevertheless many users which use power line adapters experienced this dilemma

 

Ethernet doesn’t have a valid IP Configuration modem In many instances this type of problem can arise if your router isn’t correctly configured. To repair that, you may need to produce a couple alterations to a router configuration.

 

Ethernet doesn’t have a valid IP Query — This really is merely a variant with the error message, and generally you are able to fix this by employing exactly the very same solutions.

 

Ethernet doesn’t have a valid IP Configuration Unidentified Network — Occasionally this mistake is sold with Unidentified Network message. This really is a version of this mistake, plus it could be repaired using the typical solution.

 

Ethernet doesn’t have a legitimate Connection — This form of error usually indicates there is a issue with your networking connection. To repair that, you simply need to correct your configuration a little.

 

Ethernet doesn’t have a valid config This message could appear if you can find some inconsistencies along with your system configuration. Luckily, you only have to generate some minor alterations to repair the matter.

 

Ethernet doesn’t have a valid IP Address — this really is just another variant of this mistake which may appear on several PCs. If this error arises, usually there is an ip battle that should be resolved.

 

Ethernet doesn’t function — In certain Considerable instances, your wirelessly link wont work in any way. Users reported that they have the ability touse wi fi however perhaps not Ethernet connection in the PC.

 

Ethernet doesn’t work in notebook — Exactly like a number of different errors, that 1 may impact both desktop PCs and laptops. Many notebook users reported Ethernet isn’t working at all whilst the wi fi works without the difficulties.

 

Ethernet doesn’t have IP Configuration — In rare occasions it sometimes happens that your ip address configuration is completely lost. This is simply not a big problem, however you are going to need to manually configure the ip.

 

Ethernet doesn’t link to Internet — Still another Kind of difficulty that can occur is that the inability to link with Internet with the Ethernet connection. But, users reported they’re Able to link with the Web employing the radio connection alternatively.

 

Solution 1 – Reboot the system

Ethernet doesn’t have a valid IP configuration error can be caused by Fast Startup feature. To fix this error, you need to follow these steps to disable Fast Startup:

 

Press Windows Key + S and enter control panel. Now select Control Panel from the list of results.

Ethernet doesn’t have a valid IP configuration TP Link

Select the Power Options from Control Panel.

Ethernet doesn’t have a valid IP configuration TP Netgear

In the left pane, click on Choose what the power button does.

Ethernet doesn’t have a valid IP configuration Powerline

Select Change settings that are currently unavailable.

Ethernet doesn’t have a valid IP configuration router

Uncheck the box beside Turn on fast startup (recommended) near the bottom of the window to turn off Fast Startup.

Select Save changes.

Ethernet doesn’t have a valid IP query

Reboot your computer.

Solution 2 – Check the Network Adapter Settings

The router works to designate the IP address automatically. This is the default setting, though you can still choose to assign a specific IP address. In that case, you ought to set the IP address to automatic first and check the Internet Properties for the correct settings once it is connected. Follow the instructions below:

 

Hold the Windows Key and press R.

Enter ncpa.cpl in the input field and click OK.

Ethernet doesn’t have a valid IP configuration Unidentified Network

Right click your Network Adapter in the Network Connections window and select Properties.

Ethernet doesn’t have a valid connection

From the Ethernet Properties window, select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.

Ethernet doesn’t have a valid config

You will then see the Internet Protocol Version 4 (TCP/IPv4) Properties window. Enable the following options:

Obtain an IP Address Automatically

Obtain DNS Server Address Automatically

READ ALSO: How to fix Windows network error 0x800704cf

If obtaining the IP address and DNS automatically doesn’t fix the problem, you might want to consider setting both your IP address and DNS manually. To do that, follow these steps:

 

Open your connection properties, select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.

Now select Use the following IP address and Use the following DNS server addresses. Fill in the data like on the screenshot below. After you’re done, click OK to save changes. To see the necessary information such as Default gateway and Subnet mask, you can just check connection properties on any other device that can connect successfully to your network.

Ethernet doesn’t have a valid IP address

Keep in mind that we changed our DNS to Google’s DNS in our solutions. According to users, it’s not mandatory to change both IP address and DNS, but if setting the IP address manually doesn’t help, be sure to change your DNS as well.

 

Solution 3 – Restart the router and check Ethernet cable

After performing the steps above, turn off your router or modem and switch it back on after five minutes. Now check if your PC has the valid IP configuration. If it still does not work, connect your router to your PC using a different Ethernet cable.

 

Otherwise, you may need to use a different router. If connecting to other routers won’t solve the problem, then there is an issue with your network card. Perform a factory restore to your network card, and if it does not help, replace it.

 

Solution 4 – Reinstall your Network Adapter

After completing the steps above, you must uninstall and reinstall your network adapter. Here is how:

 

Hold the Windows Key and press R.

Type hdwwiz.cpl in the input field and click OK.

Ethernet doesn’t work

Expand the Network Adapters, right click on your Ethernet card, and choose Uninstall device.

Ethernet doesn’t work on laptop

When the confirmation dialog appears, click on Uninstall.

Ethernet doesn’t have IP configuration

Reinstall your network adapter using the driver accompanying the hardware.

If reinstalling the Ethernet card does not solve the problem, you should reinstall the network interface card using the latest version of the driver from the manufacturer’s portal.

 

Solution 5 – Use Command Prompt

If you can’t access Internet due to Ethernet doesn’t have a valid IP configuration error message, you might be able to solve the problem by using Command Prompt. According to users, you can solve this problem simply by running a couple of commands. To do that, follow these steps:

 

Press Windows Key + X and choose Command Prompt (Admin) from the menu. If Command Prompt isn’t available, feel free to use PowerShell (Admin) instead.

Ethernet doesn’t connect to Internet

When Command Prompt opens, enter the following commands:

netsh winsock reset

netsh int IP reset

After running these commands, you just have to restart your PC in order to apply the changes. Once your PC restarts, the problem should be resolved and you’ll be able to access the Internet without any issues.

 

Many network issues are caused by malware, various scripts and bots. You can secure yourself by installing Cyberghost (50% off on all plans), a leader in the VPN market. It protects your PC from attacks while browsing, masks your IP address and blocks all unwanted access.

 

Solution 6 – Disable IPv6

Several users reported that they fixed the problem simply by disabling IPv6. According to them, their IPS didn’t support IPv6, so they disabled it. If you’re having Ethernet doesn’t have a valid IP configuration error, you need to disable IPv6 by following these steps:

 

READ ALSO: How to fix network error 0x8007003b in Windows 10

Open Network and Sharing Center. You can do that quickly by right clicking the network icon in the systray and choosing Open Network and Sharing Center from the menu.

Ethernet doesn’t have a valid IP configuration TP Link

When Network and Sharing Center opens, click on Change adapter settings in the left pane.

Ethernet doesn’t have a valid IP configuration Netgear

Locate your network connection, right click it and choose Properties from the menu.

 

Locate Internet Protocol Version 6 (TCP/IPv6) and uncheck it. Click on OK to save changes.

Ethernet doesn’t have a valid IP configuration Powerline

After doing that IPv6 should be disabled. Now you just have to restart your PC and check if the problem is resolved.

 

Several users are recommending to disable IPv6 using the Registry Editor. To do that, you need to follow these steps:

 

Press Windows Key + R and enter regedit. Press Enter or click OK.

Ethernet doesn’t have a valid IP configuration router

When Registry Editor opens, in the left pane navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpIP6Parameters. Right click the empty space in the right pane and choose New > DWORD (32-bit) Value. Enter DisabledComponents as the name of the new DWORD.

Ethernet doesn’t have a valid IP query

Double click DisabledComponents to open its properties. Set Value data to ffffffff and click OK to save changes.

Ethernet doesn’t have a valid IP configuration Unidentified Network

After doing that, IPv6 should be completely disabled on your PC. Now you just have to restart your PC in order to apply the changes. If you want to enable IPv6, just delete DisabledComponents DWORD from your registry.

 

If you don’t feel comfortable modifying your registry, Microsoft developed a tool that can disable IPv6 for you. Simply download Disable IPv6 tool and follow the instructions on the screen. If you want to enable IPv6 again, you just have to download and use this tool.

 

Keep in mind that IPv6 is a core component of Windows and disabling it can cause certain problems to appear. If you experience any additional network problems, you might have to enable IPv6 again.

 

READ ALSO: Mapped network drives: How to delete them on Windows 10

Solution 7 – Disable Microsoft Kernel Debug Network Adapter

According to users, sometimes unknown network devices can appear in your Device Manager. These devices can interfere with your Internet connection and cause Ethernet doesn’t have a valid IP configuration error to appear. To fix this problem, you need to find and remove unknown network adapters from Device Manager. You can do that by following these steps:

 

Press Windows Key + X and choose Device Manager from the list.

Ethernet doesn’t have a valid connection

When Device Manager opens, go to View and check Show hidden devices.

Locate Microsoft Kernel Debug Network Adapter in Network adapters section. Right click the adapter and choose Disable device from the menu.

Ethernet doesn’t have a valid config

A confirmation message will now appear. Click on Yes to disable the adapter.

Ethernet doesn’t have a valid IP address

Once you disable Microsoft Kernel Debug Network Adapter, check if the error message still appears.

 

Solution 8 – Assign a MAC address to your network card

Every network device has its own unique MAC address, and many users reported this problem because their MAC address wasn’t set in Windows. To set a network address for your network adapter, you need to do the following:

 

Open Command Prompt as administrator.

When Command Prompt opens, enter IPconfig /all and press Enter to run it.

List of information will now appear. Locate your network adapter and look for Physical Address value. The address is represented by six pairs of numbers and letters separated by dashes. This is your MAC address, write it down since you’ll need it for future steps.

Ethernet doesn’t work

Now that you know your network address, you need to assign it to your network adapter. To do that, follow these steps:

 

RECOMMENDED: Click here to fix common PC issues and speed up your system

Navigate to Network and Sharing Center and open your network connection’s properties. We showed you how to do that in Solution 6, so check it for extra information.

When the Properties window opens, click on Configure button.

Ethernet doesn’t work on laptop

Navigate to Advanced tab. Now you should see a list of properties. Select Network Address from the list. Select Value option and enter your MAC address in the field next to it. Your MAC address doesn’t use dashes, so don’t enter them. Once you enter your MAC address, click OK to save changes.

Ethernet doesn’t have IP configuration

READ ALSO: ‘Please check your network settings and try again’ Skype error

After changing your MAC address, the problem should be completely resolved. Several users reported they fixed this error by combining previous two solutions with this one, so be sure to try them all.

 

Solution 9 – Enable DHCP

DHCP is a component of Windows that automatically assigns the IP address to your PC. If you’re getting Ethernet doesn’t have a valid IP configuration error message, it might be because DHCP isn’t enabled. To fix this problem, users are suggesting to simply run network troubleshooter. To do that, follow these steps:

 

Simply right click the network icon in your sysbar and choose Troubleshoot problems.

Ethernet doesn’t connect to Internet

Troubleshooting window will now appear and check for problems.

Users are also recommending to run additional troubleshooters. To do that, you need to follow these steps:

 

Open the Settings app. You can do that quickly by pressing Windows Key + I button.

When the Settings app opens, navigate to Update & security section.

Ethernet doesn’t have a valid IP configuration TP Link

Choose Troubleshoot from the menu on the left. Now select all network troubleshooters and run them one by one. To do that, simply select the desired troubleshooter and click Run the troubleshooter button.

Ethernet doesn’t have a valid IP configuration Powerline

When the Troubleshooter window appears, follow the instructions on the screen to complete it.

After running all network troubleshooters, check if the problem is resolved. If the troubleshooters can’t fix the problem, you might have to restart DHCP service manually from Windows. To do that, follow these steps:

 

Press Windows Key + R and enter services.msc. Now press Enter or click OK.

Ethernet doesn’t have a valid IP configuration router

When Services window opens, locate DHCP Client on the list and double click it to open its properties.

Ethernet doesn’t have a valid IP query

Set the Startup type to Automatic and make sure that the service is running. Click on Apply and OK to save changes.

Ethernet doesn’t have a valid IP configuration Unidentified Network

Now right click DHCP Client and choose Restart from the menu.

Ethernet doesn’t have a valid connection

Confirmation message will appear. Click on Yes to proceed.

READ ALSO: Microsoft Network Realtime Inspection Service: How to confirm and then disable the module

 

When You restart the service, assess In case the issue still appears. If the issue still persists, you might need to restart your PC and check whether that solves the problem.

 

It is worth mentioning that your Router also lets you configure DHCP. In case you are familiar with community Hardware, then you might want to check your router’s settings and see whether the DHCP is enabled in your router.

Solution:10-Uninstall and Reinstall your Network Adapter

  1. Hold the Windows Keyand Press X. Type cpl and Click OK.
  2. Expand, Network Adapters. Note down the name of your network card.
  3. Right click on your ethernet card (nic) and choose
  4. Click Action-> Scan for hardware changes from the top menu.

If the driver is reinstalled, it should work If not, then you will need to reinstall your network interface card using the latest driver from the manufacturer’s site, using the name you noted down do a google search to find the latest driver. To avoid similar issues with other components, it is best to use DriverAgent from here and let it update all the drivers automatically before you run into issues.

Comments (No)

Leave a Reply